Home

• 8 metre USB 3.0 Active Extension Repeater Lead
• Supports transfer rates up to 5Gbps
• For even greater distances simply connect up to 5 cables in series
• USB Power Adapter cable included
• 2 Year Warranty

• 10 metre USB 3.0 Active Extension Repeater Lead
• Supports transfer rates up to 5Gbps
• For even greater distances simply connect up to 5 cables in series
• USB Power Adapter cable included
• 2 Year Warranty

• 15 metre USB 3.0 Active Extension Repeater Lead
• Supports transfer rates up to 5Gbps
• For even greater distances simply connect 2 cables in series
• USB Power Adapter cable included
• 2 Year Warranty

• High performance, active cable that provides an extended 5m connection between a computer with USB Type C port and a USB Type C device
• Cascadeable up to a maximum distance of 15m
• Supports the full USB 3.2 / 3.1 Gen 2 bandwidth for speeds of 10Gbps
• USB Power Adapter cable included
• 2 Year Warranty

• Supports USB 3.2 Gen 1 (USB 3.0), USB 2.0/1.1 backwards compatibility
• Switching between computers with buttons, TCP/IP with web GUI or RS-232 commands
• Matrix switch with presets function
• Plug and Play, no software required
• 2 Year Warranty

• Extend 2 USB 2.0 ports up to 100m using low cost Cat. 5e/6 network cable (not included)
• Bi-directional PoC (Power over Cable) requires a power supply connection from only one side of the installation
• Supports USB 2.0 High Speed and USB 1.1 Full Speed / Low Speed
• Plug and Play installation
• 2 Year Warranty

• Extend 4 USB 3.2 Gen 1 ports up to 100m using Cat.6A network cable (not included)
• Power over Cable requires a single power supply to be connected to the transmitter or receiver only
• Supports USB 3.2 Gen 1 (USB 3.0) up to 5Gbps, USB 2.0/1.1 backwards compatibility, RS232 and FSYNC pass-through ports
• Plug and Play installation
• 2 Year Warranty

• Connects a USB Type A or Type C computer to a Gigabit Ethernet network
• Supports 10/100/1000BASE-T, full and half duplex mode
• USB 3.2 / 3.1 Gen 1 / 3.0 SuperSpeed data transfer rates up to 5Gbps
• Bus-powered with no external power supply required
• 2 Year Warranty

• Installation ready Multi AV faceplate with 10cm trailing leads
• Single gang, plastic wall plate design – fits a standard mains back box
• Connectors: HDMI, VGA, USB, Audio
• Faceplate size: 86mm x 86mm
• 2 Year Warranty

• RJ-45 Female to punchdown, Unshielded
• Fully compatible with Gigabit ethernet
• Colour: White

Use in conjunction with our 12,  16 and 24 port keystone patch panels.

• RJ4-5 to toolless push down connector
• For use with 22-26 AWG CAT6 cable
• Can also be used with 110 and Krone punch down tools
• Colour: White
• 2 Year Warranty

• VGA Female to Female connectors
• Allows VGA cables to be connected to a face plate
• Suitable for use with our range of snap in blocks and wall plates
• Gold plated pins on front and rear
• 2 Year Warranty

• Right angled HDMI snap-in Keystone module with gold plated HDMI Female connectors
• For use with the Lindy AV Faceplate range
• Ideal for situations where space is limited behind the faceplate
• Dimensions: 20 x 40 X 16mm (WxDxH)
• 2 Year Warranty

• Right angled USB snap-in Keystone module with USB A to A Female connectors
• For use with the Lindy Modular AV Faceplate System
• Supports USB 1.1 and USB 2.0 devices
• Ideal for situations where space or access is limited
• 2 Year Warranty

• Right angled 3.5mm Stereo Keystone module for use with our snap-in keystone blocks
• 3.5mm Stereo keystone female to female connector
• For use with the Lindy Modular AV Faceplate System
• Ideal for situations where space or access is limited
• 2 Year Warranty

• VGA Male to Female connectors
• Allows VGA cables to be connected to a face plate
• Suitable for use with our range of snap in blocks and wall plates
• Gold plated connectors on front and rear
• 10 Year Warranty

• Supplied with fixing screws and labels, may be surface or flush mounted
• Accommodates 2 modules from AV Face Plate System
• A blanking plate can be used if only a single module is installed
• Requires a back box with a minimum depth of 44mm or greater
• Warranty: 2 years

Use in conjunction with a Single Surface Pattress Box.

• Single Snap-in block
• Supplied in a pack of 4
• Suitable for use with our range of Snap-in Blocks and face plates
• For use with all standard sized keystones (15mm x 20mm)
• 2 Year Warranty

A Dual Snap-in Block is also available.

• Dual Snap-in block
• Supplied in a pack of 4
• Suitable for use with our range of Snap-in Blocks and face plates
• For use with all standard sized keystones (15mm x 20mm)
• 2 Year Warranty

A Single Snap-in Block is also available.

• F type keystone female to female connector
• 75Ohm connectors
• Supplied in a pack of 2
• Nickel plated connectors
• Suitable for use with our range of snap in bezels and wall plates
• 2 Year Warranty

• BNC Keystone module
• Female to female nickel plated connectors
• Supplied in a pack of 2
• Suitable for use with the Lindy Modular AV Faceplate system
• 2 Year Warranty

• Low profile socket assembly only 10mm depth required - ideal for shallow pattress boxes
• High quality angled terminal block contacts accept 22-26 AWG solid core wire
• Dual type terminal blocks (for Krone or 110 IDC punchown tools) and dual T568A/T568B colour coding
• Faceplate features shuttered sockets to protect against dust and easy attach ID labels with protective cover
• Screws supplied

• Low profile socket assembly only 10mm depth required - ideal for shallow pattress boxes
• High quality angled terminal block contacts accept 22-26 AWG solid core wire
• Dual type terminal blocks (for Krone or 110 IDC punchown tools) and T568A/T568B dual colour coding
• Faceplate features shuttered sockets to protect against dust, and easy attach ID labels with protective cover
• Mounting Screws included

• Low profile design, only 20mm depth required - ideal for shallow pattress boxes
• High quality angled terminal block contacts accept 22-26 AWG solid core wire
• Dual type terminal blocks (for Krone or 110 IDC punchdown tools) and dual T568A/T568B colour coding
• Faceplate features angled, shuttered sockets to protect against dust and easy attach ID labels with protective cover
• Mounting screws included