AV Hardware

• Helps prevent electrostatic charge building up when handling CMOS and other devices prone to electrostatic damage
• Conductive threads in the fabric press against the skin allowing the charge to leak away to earth
• Adjustable to ensure a comfortable fit
• 1meg ohm total resistance
• 2 Year Warranty

• High quality angled terminal block contacts accept 22-26 AWG solid core wire
• Dual type terminal blocks (for Krone/110 compatible punchdown tools) and dual T568A/T568B colour coding
• Cable tie mounts and cable ties supplied for cable management
• Up to 48 port versions also available
• Fixing screws, cage nuts and washers supplied separately (Part No. 66034)

• Perfect solution for managing and arranging your cables
• Consistent closure strength
• Low-profile design for your cable management

The Lindy Hook and Loop Cable Tie Roll is ideal for managing and arranging your cables. This unique design allows you to easily adjust, re-position and re-use the cable ties, using any length from this continuous roll.

• High quality angled terminal block contacts accept 22-26 AWG solid core wire
• Dual type terminal blocks (for Krone/110 compatible punchdown tools) and dual T568A/T568B colour coding
• Cable tie mounts and cable ties supplied for cable management
• Up to 48 port versions also available
• Fixing screws, cage nuts and washers supplied separately (Part No. 66034)

• Static dissipative mat with two storage pockets
• Mat size: 600 x 600mm
• 1.95m ground cord with crocodile clip
• 2.5m coiled wrist strap cord
• Adjustable wrist strap

• High quality angled terminal block contacts accept 22-26 AWG solid core wire
• Dual type terminal blocks (for Krone/110 compatible punchdown tools) and dual T568A/T568B colour coding
• Cable tie mounts and cable ties supplied for cable management
• Up to 48 port versions also available
• Fixing screws, cage nuts and washers supplied separately (Part No. 66034)

• Cat.6/6A 23 to 26AWG compatible (T568B)
• Quick and Easy To Install
• 360 .deg shielding
• Reusable Up To 5 Times
• 2 Year Warranty

• High quality angled terminal block contacts accept 22-26 AWG solid core wire
• Dual type terminal blocks (for Krone/110 compatible punchdown tools) and dual T568A/T568B colour coding
• Cable tie mounts and cable ties supplied for cable management
• Up to 48 port versions also available
• Fixing screws, cage nuts and washers supplied separately (Part No. 66034)

• Allows you to internally attach a Premium Gold cable to our VGA Face Plate
• Post: # 4-40 UNC, 14mm
• Nut: # 4-40 UNC, 5mm
• Each pack contains 50 nuts and 50 posts

Assembling a Lindy VGA Face Plate

This guide shows you how to assemble a Lindy VGA Face Plate using our Premium Gold VGA cables and Holding Posts and Nuts.

• High quality angled terminal block contacts accept 22-26 AWG solid core wire
• Dual type terminal blocks (for Krone/110 compatible punchdown tools) and dual T568A/T568B colour coding
• Cable tie mounts and cable ties supplied for cable management
• Up to 48 port versions also available
• Fixing screws, cage nuts and washers supplied separately (Part No. 66034)

• High quality angled terminal block contacts accept 22-26 AWG solid core wire
• Dual type terminal blocks (for Krone/110 compatible punchdown tools) and dual T568A/T568B colour coding
• Cable tie mounts and cable ties supplied for cable management
• Up to 48 port versions also available
• Fixing screws, cage nuts and washers supplied separately (Part No. 66034)

• High quality angled terminal block contacts accept 22-26 AWG solid core wire
• Dual type terminal blocks (for Krone/110 compatible punchdown tools) and dual T568A/T568B colour coding
• Cable tie mounts and cable ties supplied for cable management
• Up to 48 port versions also available
• Fixing screws, cage nuts and washers supplied separately (Part No. 66034)

• Supports 10G Ethernet
• Standard SFP+ module form factor
• Duplex LC Connector
• 1310nm wavelength (Singlemode only)
• 2 Year Warranty

• Gigabit over copper using RJ-45, CAT5e or higher cable
• Auto MDI/MDI-X function on each port - no need for crossover cables
• Auto Negotiation and Flow Control,Full-Wire Speed eliminates bottlenecks
• Very compact size
• 2 Year Warranty

• 10/100/1000 Base-T copper to 1000 Base-FX fiber
• Support SC Multimode fiber optic 50/125 or 62.5/125 cables
• Extend fiber distance up to 550m
• Support Full/Half duplex mode and auto-negotiation
• 2 Year Warranty

• Remote management switch for up to 8 computers or other devices
• Control via simple to use browser interface or software
• Built-in web server, supports real time monitoring for the current consumption of the power strip
• Provides audio alarm when the power consumption exceeds the value for overload warning
• 2 Year Warranty

• Remote management switch for up to 16 computers or other devices
• Control via simple to use browser interface or software
• Built-in web server, supports real time monitoring for the current consumption of the power strip
• Provides audio alarm when the power consumption exceeds the value for overload warning
• 2 Year Warranty

• Remote management switch for up to 8 computers or other devices
• Daily, Weekly, Monthly and Yearly Power Consumption Data
• IPv4 and IPv6 Support
• TLS/SSL Web Browser (Https) for set up and operation
• 2 Year Warranty

• RJ-45 Female to punchdown, Unshielded
• Fully compatible with Gigabit ethernet
• Colour: White

Use in conjunction with our 12,  16 and 24 port keystone patch panels.

• RJ4-5 to toolless push down connector
• For use with 22-26 AWG CAT6 cable
• Can also be used with 110 and Krone punch down tools
• Colour: White
• 2 Year Warranty

• Low profile socket assembly only 10mm depth required - ideal for shallow pattress boxes
• High quality angled terminal block contacts accept 22-26 AWG solid core wire
• Dual type terminal blocks (for Krone or 110 IDC punchown tools) and dual T568A/T568B colour coding
• Faceplate features shuttered sockets to protect against dust and easy attach ID labels with protective cover
• Screws supplied

• Low profile socket assembly only 10mm depth required - ideal for shallow pattress boxes
• High quality angled terminal block contacts accept 22-26 AWG solid core wire
• Dual type terminal blocks (for Krone or 110 IDC punchown tools) and T568A/T568B dual colour coding
• Faceplate features shuttered sockets to protect against dust, and easy attach ID labels with protective cover
• Mounting Screws included

• Low profile design, only 20mm depth required - ideal for shallow pattress boxes
• High quality angled terminal block contacts accept 22-26 AWG solid core wire
• Dual type terminal blocks (for Krone or 110 IDC punchdown tools) and dual T568A/T568B colour coding
• Faceplate features angled, shuttered sockets to protect against dust and easy attach ID labels with protective cover
• Mounting screws included

• Low profile socket assembly only 20mm depth required - ideal for shallow pattress boxes
• High quality angled terminal block contacts accept 22-26 AWG solid core wire
• Dual type terminal blocks (for Krone or 110 IDC punchdown tools) and dual T568A/T568B colour coding
• Faceplate features angled, shuttered sockets to protect against dust and easy attach ID labels with protective cover
• Mounting screws included