• Indoor Digital signage flat panel Black
• 116.8 cm (46") 1920 x 1080 pixels LED 500 cd/m²
• Direct-LED 8 ms

• Right angled 3.5mm Stereo Keystone module for use with our snap-in keystone blocks
• 3.5mm Stereo keystone female to female connector
• For use with the Lindy Modular AV Faceplate System
• Ideal for situations where space or access is limited
• 2 Year Warranty

• Mount a single monitor to a standard office desk
• Flexible metal arm for easy manoeuvrability of the display
• Conforms to VESA standards (75 x 75mm and 100 x 100mm)
• Robust, lightweight metal pole with aluminium powder coated bracket
• 2 Year Warranty

• Extract stereo or multi-channel audio from a HDMI signal
• Support resolutions up 4096x2160@30Hz 4:4:4 8bit
• Supports various audio formats including LPCM, Dolby Digital 2/5.1 and DTS-HD
• CEC Pass-through
• 2 Year Warranty

• Extends DVI-D signals at distances of up to 1500m using a single fibre optic cable (not included)
• Compatible with DVI-D 2.0 specifications including HDTV and HD-Ready displays
• Supports HDTV resolutions up to 1920 x 1200 @ 60Hz / 1080p @ 60 Hz
• Direct connection to Source and Display equipment
• 2 Year Warranty

• Continuously emulates DisplayPort EDID information
• Supports resolutions up to 7680x4320@30Hz or 3840x2160@ 144Hz, with additional support for HDR
• Uses Cloned Data or Pre-stored resolutions/timings
• Headless connection (No monitor connection required)
• 2 Year Warranty

• Ultra-narrow bezel
• 178° Wide viewing angle
• Anti-Glare
• Round-the-clock operation
• 500 nits

• VGA Male to Female connectors
• Allows VGA cables to be connected to a face plate
• Suitable for use with our range of snap in blocks and wall plates
• Gold plated connectors on front and rear
• 10 Year Warranty

• Mount 2 monitors to a standard office desk
• Dual full motion arms for simple manoeuvrability
• Conforms to VESA standards (75 x 75mm and 100 x 100mm)
• Robust, lightweight metal pole with aluminium powder coated bracket
• 2 Year Warranty

• Converts HDMI signals into DisplayPort, DVI or VGA signals
• Supports Ultra HD resolutions 3840x2160@30Hz for DisplayPort and Full HD 1920x1200@60Hz for DVI/VGA
• Easily connect with a single legacy or modern display at any one time
• Quick and simple plug and play installation
• 2 Year Warranty

• Distributes HDMI resolutions up to 70m over Cat.6 network cable via HDBaseT technology
• Supports HDMI 10.2G resolutions up to 4K@30Hz 4:4:4
• CEC pass-through and bi-directional IR for simple control
• Supports PoC (Power over Cable), requiring a power supply connection from only one side of the installation
• 2 Year Warranty

• Continuously emulates HDMI EDID information
• Supports resolutions up to 7680x4320@60Hz or 3840x2160@120Hz with additional support for HDR
• Uses Cloned Data or Pre-stored resolutions/timings
• Headless connection (No monitor connection required)
• 2 Year Warranty

• Mount four separate monitors to a standard office desk
• Flexible metal arms for easy manoeuvrability of the displays
• Conforms to VESA standards (75 x 75mm and 100 x 100mm)
• Robust, lightweight metal pole with aluminium powder coated bracket
• 2 Year Warranty

• Connect your VGA equipment to a DVI-D display or projector
• Supports resolutions up to 1080p / 1920 x 1200
• Powered by USB Type A (approx 20cm cable length)
• Length: 10cm (approx)
• 2 Year Warranty

• An advanced Splitter Extender that extends and distributes HDMI and IR signals to 4 displays at distances of up to 70m
• Supports resolutions up to 3840x2160@30Hz 4:4:4 8bit, including FullHD
• Features a loop-through HDMI output on the transmitter for local monitoring/cascading
• Supports power over Cable (PoC), only a single power supply is required for operation
• 2 Year Warranty

• Stores EDID data to ensure maximum compatibility between a source and display
• Clones and stores EDID / DDC information from a HDMI, VGA or DVI display
• Overwrites pre-set EDID of emulators with stored EDID for time saving compatibility
• For use with HDMI (32104), VGA (32121) and DVI (32122) EDID Emulators
• 2 Year Warranty

• Supplied with fixing screws and labels, may be surface or flush mounted
• Accommodates 2 modules from AV Face Plate System
• A blanking plate can be used if only a single module is installed
• Requires a back box with a minimum depth of 44mm or greater
• Warranty: 2 years

Use in conjunction with a Single Surface Pattress Box.

• Part of the Lindy Silver Modular Desktop Mounting System
• Create a customized installation
• Sturdy, adjustable C-Clamp for mounting the 35mm diameter pole to a desk
• Robust, lightweight metal construction with a durable, powder coated silver grey finish

• Converts DVI-D signals into VGA
• Supports resolutions up to 1920x1200 including 1080p
• Add a VGA monitor as a secondary display
• Quick and simple plug and play installation
• 2 Year Warranty

• Extend HDMI signals at distances of up to 300m using a single LC multimode fibre cable
• Supports resolutions up to 3840x2160p@60Hz 4:2:0 8bit
• 10.2 Gbps Total Bandwidth over Single 2-core Fibre Optic Cable Link
• Supports lossless audio formats including Dolby TrueHD and DTS-HD
• 2 Year Warranty

• Continuously emulates VGA EDID information
• Supports resolutions up to 1920x1200@60Hz
• For use with 32120 for cloning
• Powered via VGA Source Interface, 3.5/1.35mm Optional DC jack for non-powered source devices
• 2 Year Warranty

• Single Snap-in block
• Supplied in a pack of 4
• Suitable for use with our range of Snap-in Blocks and face plates
• For use with all standard sized keystones (15mm x 20mm)
• 2 Year Warranty

A Dual Snap-in Block is also available.