AV Hardware

• Continuously emulates HDMI EDID information
• Supports resolutions up to 3840x2160@60Hz including HDCP 2.2 pass-through and HDR
• Uses cloned data or, when this is not available, stored pre-set screen resolutions/timings
• Powered via HDMI Source Interface
• 2 Year Warranty

• 6 x IEC C19 Sockets and 16 x IEC C13 Sockets
• 3m Mains Cable with IEC 60309 32A rated Commando plug
• Built in surge protection
• Colour: Black
• 2 Year Warranty

Fixing screws, cage nuts and washers supplied separately (Part No. 66034)

The Lindy 22 Way Vertical PDU is ideal for fitting in cabinets that are used in data centres and call centres. The 32Amp rated 2 pole Commando Plug is suitable for powering all your network and server devices within the cabinet.

• Gigabit over copper using RJ-45, CAT5e or higher cable
• Auto MDI/MDI-X function on each port - no need for crossover cables
• Auto Negotiation and Flow Control,Full-Wire Speed eliminates bottlenecks
• Very compact size
• 2 Year Warranty

• Continuously emulates DVI EDID Information
• Supports resolutions up to 1920x1200@60Hz
• Cloning function allows for the use of copied EDID's or various pre-set EDID data.
• Powered via DVI source interface.
• 2 Year Warranty

• Fitted with 3m cable and 13 Amp fused UK Mains Plug
• Integral On/Off rocker switch
• Fixing screws, cage nuts and washers supplied separately (Part No. 66034)
• Colour: Black
• 2 Year Warranty

• 10/100/1000 Base-T copper to 1000 Base-FX fiber
• Support SC Multimode fiber optic 50/125 or 62.5/125 cables
• Extend fiber distance up to 550m
• Support Full/Half duplex mode and auto-negotiation
• 2 Year Warranty

• Remote management switch for up to 8 computers or other devices
• Control via simple to use browser interface or software
• Built-in web server, supports real time monitoring for the current consumption of the power strip
• Provides audio alarm when the power consumption exceeds the value for overload warning
• 2 Year Warranty

• Continuously emulates DisplayPort EDID information
• Supports resolutions up to 7680x4320@30Hz or 3840x2160@ 144Hz, with additional support for HDR
• Uses Cloned Data or Pre-stored resolutions/timings
• Headless connection (No monitor connection required)
• 2 Year Warranty

• Fitted with UK Mains Plug and 3m cable
• 13 Amp fused
• Integral On/Off rocker switch
• Fixing screws, cage nuts and washers supplied separately (Part No. 66034)
• 2 Year Warranty

• Remote management switch for up to 16 computers or other devices
• Control via simple to use browser interface or software
• Built-in web server, supports real time monitoring for the current consumption of the power strip
• Provides audio alarm when the power consumption exceeds the value for overload warning
• 2 Year Warranty

• Continuously emulates HDMI EDID information
• Supports resolutions up to 7680x4320@60Hz or 3840x2160@120Hz with additional support for HDR
• Uses Cloned Data or Pre-stored resolutions/timings
• Headless connection (No monitor connection required)
• 2 Year Warranty

• Fitted with UK Mains Plug
• 13 Amp fused
• Integral On/Off rocker switch
• Cable Length: 3m
• Fixing screws, cage nuts and washers supplied separately (Part No. 66034)
• Colour: Black

• Remote management switch for up to 8 computers or other devices
• Daily, Weekly, Monthly and Yearly Power Consumption Data
• IPv4 and IPv6 Support
• TLS/SSL Web Browser (Https) for set up and operation
• 2 Year Warranty

• Stores EDID data to ensure maximum compatibility between a source and display
• Clones and stores EDID / DDC information from a HDMI, VGA or DVI display
• Overwrites pre-set EDID of emulators with stored EDID for time saving compatibility
• For use with HDMI (32104), VGA (32121) and DVI (32122) EDID Emulators
• 2 Year Warranty

• IEC 10A C14 Male Plug to 8 x IEC Sockets (total load must not exceed 10A) with 3m cable
• Integral On/Off rocker switch
• Fixing screws, cage nuts and washers supplied separately (Part No. 66034)
• Colour: Black
• 2 Year Warranty

• RJ-45 Female to punchdown, Unshielded
• Fully compatible with Gigabit ethernet
• Colour: White

Use in conjunction with our 12,  16 and 24 port keystone patch panels.

• Continuously emulates VGA EDID information
• Supports resolutions up to 1920x1200@60Hz
• For use with 32120 for cloning
• Powered via VGA Source Interface, 3.5/1.35mm Optional DC jack for non-powered source devices
• 2 Year Warranty

• IEC 10A C14 Male Plug to 10 x IEC Sockets (total load must not exceed 10A) with 3m cable
• Integral On/Off rocker switch
• Fixing screws, cage nuts and washers supplied separately (Part No. 66034)
• Colour: Black
• 2 Year Warranty

• RJ4-5 to toolless push down connector
• For use with 22-26 AWG CAT6 cable
• Can also be used with 110 and Krone punch down tools
• Colour: White
• 2 Year Warranty

• Continuously emulates DVI EDID information
• Supports resolutions up to 2560x1600@60Hz
• For use with 32120 for cloning
• Powered via DVI Source Interface
• 2 Year Warranty

• IEC 10A C14 Male Plug to 12 x IEC Sockets (total load must not exceed 10A) with 3m cable
• Integral On/Off rocker switch
• Fixing screws, cage nuts and washers supplied separately (Part No. 66034)
• Colour: Black
• 2 Year Warranty

• Low profile socket assembly only 10mm depth required - ideal for shallow pattress boxes
• High quality angled terminal block contacts accept 22-26 AWG solid core wire
• Dual type terminal blocks (for Krone or 110 IDC punchown tools) and dual T568A/T568B colour coding
• Faceplate features shuttered sockets to protect against dust and easy attach ID labels with protective cover
• Screws supplied

• Extends VGA and Audio signals up to 300m with a single CAT5e cable
• Supports resolutions up 1920x1200/1600x1200@60Hz
• Built in Gain and Skew controls
• Mono audio signal support (left and right channels are combined)
• 2 Year Warranty

• Low profile socket assembly only 10mm depth required - ideal for shallow pattress boxes
• High quality angled terminal block contacts accept 22-26 AWG solid core wire
• Dual type terminal blocks (for Krone or 110 IDC punchown tools) and T568A/T568B dual colour coding
• Faceplate features shuttered sockets to protect against dust, and easy attach ID labels with protective cover
• Mounting Screws included