Audio & Video

• Stores EDID data to ensure maximum compatibility between a source and display
• Clones and stores EDID / DDC information from a HDMI, VGA or DVI display
• Overwrites pre-set EDID of emulators with stored EDID for time saving compatibility
• For use with HDMI (32104), VGA (32121) and DVI (32122) EDID Emulators
• 2 Year Warranty

• Full 4K60Hz Input And Output for multiple sources on a single screen
• Supports 8 Display modes: Single, PIP, PBP 1 and 2, Triple 1 and 2, Quad 1 and 2
• Full volume support of volume and independent audio switching
• Seamless Switching of Audio And Video Signals
• 2 Year Warranty

• Extend HDMI signals at distances of up to 300m using a single LC multimode fibre cable
• Supports resolutions up to 3840x2160p@60Hz 4:2:0 8bit
• 10.2 Gbps Total Bandwidth over Single 2-core Fibre Optic Cable Link
• Supports lossless audio formats including Dolby TrueHD and DTS-HD
• 2 Year Warranty

• Single Snap-in block
• Supplied in a pack of 4
• Suitable for use with our range of Snap-in Blocks and face plates
• For use with all standard sized keystones (15mm x 20mm)
• 2 Year Warranty

A Dual Snap-in Block is also available.

• Displays HDMI signals across 2 displays simultaneously from one source device
• Supports resolutions up to 4K 60Hz 4:4:4, with additional support for HDR
• Extract digital and analogue audio from HDMI for non-HDMI amplifiers
• Features a neat switch for downscaling from 4K to 1080p
• 2 Year Warranty

• Continuously emulates DVI EDID information
• Supports resolutions up to 2560x1600@60Hz
• For use with 32120 for cloning
• Powered via DVI Source Interface
• 2 Year Warranty

• Dual Snap-in block
• Supplied in a pack of 4
• Suitable for use with our range of Snap-in Blocks and face plates
• For use with all standard sized keystones (15mm x 20mm)
• 2 Year Warranty

A Single Snap-in Block is also available.

• Extends HDMI signals up to 300m using a single LC multi-mode cable
• Supports resolutions up to 4K Ultra HD @ 60Hz
• Experience an expanded range of contrasts and colours with HDR (High Dynamic Range)
• Supports lossless HDMI audio formats including Dolby Atmos and DTS-X
• 2 Year Warranty

• F type keystone female to female connector
• 75Ohm connectors
• Supplied in a pack of 2
• Nickel plated connectors
• Suitable for use with our range of snap in bezels and wall plates
• 2 Year Warranty

• Switches between 3 HDMI source devices when connected to a single display
• Supports 18G resolutions up to 4K@60Hz, with additional support for HDR
• Flexible control via push button, IR remote and auto-switching
• Compact, minimalist design to ensure no distraction from the display or installation
• 2 Year Warranty

• BNC Keystone module
• Female to female nickel plated connectors
• Supplied in a pack of 2
• Suitable for use with the Lindy Modular AV Faceplate system
• 2 Year Warranty

• Extends HDMI and IR Signals up to 70m using a single Cat.6 Cable
• Supports resolutions up to 3840x2160@30Hz 4:4:4 8bit
• Features a loop-through HDMI output on the Transmitter for local monitoring
• Supports power over Cable, only a single power supply is required
• 2 Year Warranty

• Split a single HDMI 2.0 source across 2 HDMI displays
• Supports resolutions up to 4K@60Hz 4:4:4, with additional support for HDR
• HDCP 2.2 support for enhanced compatibility
• EDID Management for hassle free installation
• 2 Year Warranty

• Split a single HDMI 2.0 source across 4 HDMI displays
• Supports resolutions up to 4K@60Hz 4:4:4, with additional support for HDR
• HDCP 2.2 support for enhanced compatibility
• EDID Management for hassle free installation
• 2 Year Warranty

• Distributes HDMI resolutions up to 150m over Cat.6 network cable via HDBaseT and Long Reach technology
• Supports HDMI 18G resolutions up to 4K 3840x2160@60Hz 4:4:4, with additional support for HDR
• RS-232, CEC pass-through and bi-directional IR for simple control
• Supports PoC (Power over cable), requiring a power supply connection from only one side of the installation
• 2 Year Warranty

• Split a single HDMI 18G source across 8 HDMI displays
• Supports resolutions up to 4K@60Hz 4:4:4, with additional support for HDR
• HDCP 2.2 support for enhanced compatibility
• EDID Management for hassle free installation
• 2 Year Warranty

• Extends HDMI signals over a single powerline circuit
• Transmit content to 3 compatible receivers, as well as to a local HDMI display
• Supports resolutions up to Full HD 1920x1080@60Hz
• Receive IR signals from the display side of the setup
• 2 Year Warranty

• Extends HDMI signals over a single powerline circuit
• Receive HDMI signals and distribute to up to 3 displays using multiple receivers
• Supports resolutions up to Full HD 1920x1080@60Hz
• Receive IR signals from the display side of the setup
• 2 Year Warranty

• Distribute 4K HDMI signals to up to 4 displays in multiple locations
• Supports resolutions up to 4K@60Hz, with additional support for HDR
• Features a loop-through HDMI output on the transmitter for local monitoring or cascading for larger installs
• Supports Power over Cable (PoC) to the receivers, only a single power supply is required for operation
• 2 Year Warranty

• Extends DVI-D video signals up to 70m using low cost here.

  Please add the required cable length in the filter list on the left side and select the Solid Core cable.

• Switches between 8 HDMI source devices and 8 HDMI displays as a professional matrix
• Creates single video walls (up to 4x2) or multiple video walls (2x2)
• Seamlessly switch between devices under 0.1ms
• Control output scaling to ensure the optimum or consistent resolution is shown
• 2 Year Warranty

• Extends DVI-D signals at distances of up to 500m using dual fibre optic cables (not included)
• Compatible with DVI-D 2.0 specifications including HDTV and HD-Ready displays
• Supports HDTV resolutions up to 1920 x 1200 @ 60Hz / 1080p @ 60 Hz
• 6Gbps Total Bandwidth over Dual Duplex or 4x LC Simplex Fibre Optic Cables
• 2 Year Warranty

• Converts and Scales 8 AV Inputs to resolutions up to Full HD 1080p
• Accepts HDMI, VGA, Component and Composite video signals
• Simultaneous video output via VGA and 2 x HDMI
• Controlled by IR, OSD, RS-232, Telnet and Web GUI (IP/Ethernet)
• 2 Year Warranty

• Professional presentation switch for connecting various source devices to a HDMI display
• Supports multi-format input resolutions up to 4K@60Hz, with additional support for HDR
• Includes 70m HDBaseT receiver with IR and RS-232 for extended switching and control
• IR, Push Button, Contacts, RS-232 and Web Gui control options for simple, flexible management of the source devices
• 2 Year Warranty