Filter By
Availability
Selections
Categories
New Products
New products
Subcategories
There are 41 products.
Active filters
In Stock
- New
Lindy 300m Cat.6 VGA and Audio Extender
£135.82
- Extends VGA and Audio signals up to 300m with a single CAT5e cable
- Supports resolutions up 1920x1200/1600x1200@60Hz
- Built in Gain and Skew controls
- Mono audio signal support (left and right channels are combined)
- 2 Year Warranty
In Stock
- New
Lindy HDMI 10.2G EDID Emulator
£23.66
- Continuously emulates HDMI EDID information
- Supports resolutions up to 3840x2160@30Hz including HDCP pass-through
- For use with 32120 for cloning
- Powered via HDMI Source Interface
- 2 Year Warranty
In Stock
- New
Lindy 300m Cat.6 4 Port VGA Splitter Extender Transmitter
£141.42
- Extends 4 x VGA signals simultaneously up to 300m with standard network cables
- Combine with the compatible receiver (35404) to create a 4-zone extension solution
- Supports resolutions up to 1920x1080, with dual mono audio embedding
- Local VGA loop-out connection with dual mono audio extraction
- 2 Year Warranty
In Stock
- New
Lindy HDMI 2.0 18G EDID Emulator
£100.15
- Supports EDID learning or Preset Emulation
- 15 Pre-set EDID modes with blocks for AV and PC applications
- Supports resolutions up to Ultra HD 4K 60Hz including HDCP 2.2 pass-through
- Powered via HDMI source interface
- 2 Year Warranty
In Stock
- New
Lindy 300m Cat.6 2 Port VGA Receiver
£94.76
- Receives VGA signals over 300m network cable from the compatible transmitter (35403)
- Distribute the received signal across 2 separate VGA displays
- Supports resolutions up to 1920x1080, with dual mono audio extraction
- Adjustable EQ and gain control for ensuring optimum image quality
- 2 Year Warranty
In Stock
- New
Lindy HDMI 2.0 EDID Emulator
£46.15
- Continuously emulates HDMI EDID information
- Supports resolutions up to 3840x2160@60Hz including HDCP 2.2 pass-through and HDR
- Uses cloned data or, when this is not available, stored pre-set screen resolutions/timings
- Powered via HDMI Source Interface
- 2 Year Warranty
In Stock
- New
Lindy 50m HDMI 4K30 Repeater, HDCP 2.2
£21.27
- Extends HDMI signals up to 50m - connects two HDMI cables together to make longer transmission distances
- Supports resolutions of 1920x1080p@60Hz over 50m and 3840x2160p@60Hz 4:2:0 over 35m
- Powered from the HDMI interface, no external power required
- HDCP Pass-through
- 2 Year Warranty
In Stock
- New
Lindy DVI EDID Emulator with Cloning
£28.66
- Continuously emulates DVI EDID Information
- Supports resolutions up to 1920x1200@60Hz
- Cloning function allows for the use of copied EDID's or various pre-set EDID data.
- Powered via DVI source interface.
- 2 Year Warranty
In Stock
- New
Lindy DisplayPort 1.4 EDID Emulator
£87.15
- Continuously emulates DisplayPort EDID information
- Supports resolutions up to 7680x4320@30Hz or 3840x2160@ 144Hz, with additional support for HDR
- Uses Cloned Data or Pre-stored resolutions/timings
- Headless connection (No monitor connection required)
- 2 Year Warranty
In Stock
- New
Lindy 70m Cat.6 HDMI 4K30, IR and RS-232 HDBaseT Extender with PoC
£244.66
- Distributes HDMI resolutions up to 70m over Cat.6 network cable via HDBaseT technology
- Supports HDMI 10.2G resolutions up to 4K@30Hz 4:4:4
- CEC pass-through and bi-directional IR for simple control
- Supports PoC (Power over Cable), requiring a power supply connection from only one side of the installation
- 2 Year Warranty
In Stock
- New
Lindy HDMI 2.1 EDID Emulator
£63.73
- Continuously emulates HDMI EDID information
- Supports resolutions up to 7680x4320@60Hz or 3840x2160@120Hz with additional support for HDR
- Uses Cloned Data or Pre-stored resolutions/timings
- Headless connection (No monitor connection required)
- 2 Year Warranty
In Stock
- New
Lindy 300m Fibre Optic HDMI 4K30 Extender
£506.74
- Extend HDMI signals at distances of up to 300m using a single LC multimode fibre cable
- Supports resolutions up to 3840x2160p@60Hz 4:2:0 8bit
- 10.2 Gbps Total Bandwidth over Single 2-core Fibre Optic Cable Link
- Supports lossless audio formats including Dolby TrueHD and DTS-HD
- 2 Year Warranty
In Stock
- New
Lindy DVI EDID Emulator
£22.02
- Continuously emulates DVI EDID information
- Supports resolutions up to 2560x1600@60Hz
- For use with 32120 for cloning
- Powered via DVI Source Interface
- 2 Year Warranty
In Stock
- New
Lindy 300m HDMI 18G Fiber Optic extender
£759.58
- Extends HDMI signals up to 300m using a single LC multi-mode cable
- Supports resolutions up to 4K Ultra HD @ 60Hz
- Experience an expanded range of contrasts and colours with HDR (High Dynamic Range)
- Supports lossless HDMI audio formats including Dolby Atmos and DTS-X
- 2 Year Warranty
In Stock
- New
Lindy 70m Cat.6 HDMI 4K30 and IR Extender with PoC and Loop Out
£79.77
- Extends HDMI and IR Signals up to 70m using a single Cat.6 Cable
- Supports resolutions up to 3840x2160@30Hz 4:4:4 8bit
- Features a loop-through HDMI output on the Transmitter for local monitoring
- Supports power over Cable, only a single power supply is required
- 2 Year Warranty
In Stock
- New
Lindy 150m Cat.6 HDMI 4K60, IR and RS-232 HDBaseT Extender
£421.75
- Distributes HDMI resolutions up to 150m over Cat.6 network cable via HDBaseT and Long Reach technology
- Supports HDMI 18G resolutions up to 4K 3840x2160@60Hz 4:4:4, with additional support for HDR
- RS-232, CEC pass-through and bi-directional IR for simple control
- Supports PoC (Power over cable), requiring a power supply connection from only one side of the installation
- 2 Year Warranty
In Stock
- New
Lindy HDMI over Powerline Extender, Transmitter
£57.65
- Extends HDMI signals over a single powerline circuit
- Transmit content to 3 compatible receivers, as well as to a local HDMI display
- Supports resolutions up to Full HD 1920x1080@60Hz
- Receive IR signals from the display side of the setup
- 2 Year Warranty
In Stock
- New
Lindy HDMI over Powerline Extender, Receiver
£57.65
- Extends HDMI signals over a single powerline circuit
- Receive HDMI signals and distribute to up to 3 displays using multiple receivers
- Supports resolutions up to Full HD 1920x1080@60Hz
- Receive IR signals from the display side of the setup
- 2 Year Warranty
Last items in stock
- New
Lindy 70m Cat.6 4 Port HDMI 4K60 Splitter Extender
£435.80
- Distribute 4K HDMI signals to up to 4 displays in multiple locations
- Supports resolutions up to 4K@60Hz, with additional support for HDR
- Features a loop-through HDMI output on the transmitter for local monitoring or cascading for larger installs
- Supports Power over Cable (PoC) to the receivers, only a single power supply is required for operation
- 2 Year Warranty
In Stock
- New
Lindy 70m Cat.6 DVI-D Single Link Extender
£95.92
- Extends DVI-D video signals up to 70m using low cost here.
Please add the required cable length in the filter list on the left side and select the Solid Core cable.
In Stock
- New
Lindy 500m Fibre Optic DVI-D Single Link Extender
£375.72
- Extends DVI-D signals at distances of up to 500m using dual fibre optic cables (not included)
- Compatible with DVI-D 2.0 specifications including HDTV and HD-Ready displays
- Supports HDTV resolutions up to 1920 x 1200 @ 60Hz / 1080p @ 60 Hz
- 6Gbps Total Bandwidth over Dual Duplex or 4x LC Simplex Fibre Optic Cables
- 2 Year Warranty
In Stock
- New
Lindy 100m Cat.6 HDMI 4K60, Audio, IR and RS-232 HDBaseT Extender
£694.18
- Distributes HDMI resolutions up to 100m over Cat.6 network cable via HDBaseT technology
- Supports HDMI 18G resolutions up to 4K@60Hz 4:4:4, with additional support for HDR
- ARC Support as well as RS-232, CEC and Ethernet pass-through and bi-directional IR for simple control
- Supports PoC (Power over cable), requiring a power supply connection from only one side of the installation
- 2 Year Warranty
In Stock
- New
Lindy 100m Cat.6 HDMI 4K60, Audio, IR and RS-232 HDBaseT Transmitter
£364.73
- Distributes HDMI resolutions up to 100m over Cat.6 network cable via HDBaseT technology
- Supports HDMI 18G resolutions up to 4K@60Hz 4:4:4, with additional support for HDR
- ARC Support as well as RS-232, CEC and Ethernet pass-through and bi-directional IR for simple control
- Supports PoC (Power over cable), requiring a power supply connection from only one side of the installation
- 2 Year Warranty
In Stock
- New
Lindy 100m Cat.6 HDMI 4K60, Audio, IR and RS-232 HDBaseT Receiver
£364.73
- Distributes HDMI resolutions up to 100m over Cat.6 network cable via HDBaseT technology
- Supports HDMI 18G resolutions up to 4K@60Hz 4:4:4, with additional support for HDR
- ARC Support as well as RS-232, CEC and Ethernet pass-through and bi-directional IR for simple control
- Supports PoC (Power over cable), requiring a power supply connection from only one side of the installation
- 2 Year Warranty
