Filter By
Availability
Selections
Categories
New Products
New products
Audio & Video
Subcategories
There are 57 products.
Active filters
Multi AV Faceplate
£32.05
- Installation ready Multi AV faceplate with 10cm trailing leads
- Single gang, plastic wall plate design – fits a standard mains back box
- Connectors: HDMI, VGA, USB, Audio
- Faceplate size: 86mm x 86mm
- 2 Year Warranty
300m Cat.6 VGA and Audio Extender
£135.82
- Extends VGA and Audio signals up to 300m with a single CAT5e cable
- Supports resolutions up 1920x1200/1600x1200@60Hz
- Built in Gain and Skew controls
- Mono audio signal support (left and right channels are combined)
- 2 Year Warranty
HDMI 4K30 EDID Emulator
£23.66
- Continuously emulates HDMI EDID information
- Supports resolutions up to 3840x2160@30Hz including HDCP pass-through
- For use with 32120 for cloning
- Powered via HDMI Source Interface
- 2 Year Warranty
VGA Female to Female Snap-in Block
£7.50
- VGA Female to Female connectors
- Allows VGA cables to be connected to a face plate
- Suitable for use with our range of snap in blocks and wall plates
- Gold plated pins on front and rear
- 2 Year Warranty
300m Cat.6 4 Port VGA Splitter Extender Transmitter
£141.42
- Extends 4 x VGA signals simultaneously up to 300m with standard network cables
- Combine with the compatible receiver (35404) to create a 4-zone extension solution
- Supports resolutions up to 1920x1080, with dual mono audio embedding
- Local VGA loop-out connection with dual mono audio extraction
- 2 Year Warranty
HDMI 4K60 EDID Emulator, HDCP 2.2
£100.15
- Supports EDID learning or Preset Emulation
- 15 Pre-set EDID modes with blocks for AV and PC applications
- Supports resolutions up to Ultra HD 4K 60Hz including HDCP 2.2 pass-through
- Powered via HDMI source interface
- 2 Year Warranty
HDMI Female to Female 90 Degree Keystone
£12.78
- Right angled HDMI snap-in Keystone module with gold plated HDMI Female connectors
- For use with the Lindy AV Faceplate range
- Ideal for situations where space is limited behind the faceplate
- Dimensions: 20 x 40 X 16mm (WxDxH)
- 2 Year Warranty
300m Cat.6 2 Port VGA Receiver
£94.76
- Receives VGA signals over 300m network cable from the compatible transmitter (35403)
- Distribute the received signal across 2 separate VGA displays
- Supports resolutions up to 1920x1080, with dual mono audio extraction
- Adjustable EQ and gain control for ensuring optimum image quality
- 2 Year Warranty
HDMI 4K60 EDID Emulator
£46.15
- Continuously emulates HDMI EDID information
- Supports resolutions up to 3840x2160@60Hz including HDCP 2.2 pass-through and HDR
- Uses cloned data or, when this is not available, stored pre-set screen resolutions/timings
- Powered via HDMI Source Interface
- 2 Year Warranty
USB A to A 90 Degree Keystone
£7.50
- Right angled USB snap-in Keystone module with USB A to A Female connectors
- For use with the Lindy Modular AV Faceplate System
- Supports USB 1.1 and USB 2.0 devices
- Ideal for situations where space or access is limited
- 2 Year Warranty
HDMI 4K30 Repeater
£21.27
- Extends HDMI signals up to 50m - connects two HDMI cables together to make longer transmission distances
- Supports resolutions of 1920x1080p@60Hz over 50m and 3840x2160p@60Hz 4:2:0 over 35m
- Powered from the HDMI interface, no external power required
- HDCP Pass-through
- 2 Year Warranty
DVI EDID Emulator with Cloning
£28.66
- Continuously emulates DVI EDID Information
- Supports resolutions up to 1920x1200@60Hz
- Cloning function allows for the use of copied EDID's or various pre-set EDID data.
- Powered via DVI source interface.
- 2 Year Warranty
90 Degree 3.5mm Stereo Keystone
£6.78
- Right angled 3.5mm Stereo Keystone module for use with our snap-in keystone blocks
- 3.5mm Stereo keystone female to female connector
- For use with the Lindy Modular AV Faceplate System
- Ideal for situations where space or access is limited
- 2 Year Warranty
DisplayPort 1.4 EDID Emulator
£87.15
- Continuously emulates DisplayPort EDID information
- Supports resolutions up to 7680x4320@30Hz or 3840x2160@ 144Hz, with additional support for HDR
- Uses Cloned Data or Pre-stored resolutions/timings
- Headless connection (No monitor connection required)
- 2 Year Warranty
Right Angled VGA Snap-in Block
£6.58
- VGA Male to Female connectors
- Allows VGA cables to be connected to a face plate
- Suitable for use with our range of snap in blocks and wall plates
- Gold plated connectors on front and rear
- 10 Year Warranty
70m Cat.6 HDMI 4K30, IR and RS-232 HDBaseT Extender with PoC
£244.66
- Distributes HDMI resolutions up to 70m over Cat.6 network cable via HDBaseT technology
- Supports HDMI 10.2G resolutions up to 4K@30Hz 4:4:4
- CEC pass-through and bi-directional IR for simple control
- Supports PoC (Power over Cable), requiring a power supply connection from only one side of the installation
- 2 Year Warranty
HDMI 8K60 EDID Emulator
£63.73
- Continuously emulates HDMI EDID information
- Supports resolutions up to 7680x4320@60Hz or 3840x2160@120Hz with additional support for HDR
- Uses Cloned Data or Pre-stored resolutions/timings
- Headless connection (No monitor connection required)
- 2 Year Warranty
Coax to F-Type Keystone, Pack of 2
£4.67
- Coax to F-Type Keystone module (supplied as a pack of 2)
- Coax female to F-Type female connectors
- 75 Ohm, nickel plated connectors
- For use with the Lindy Modular AV Faceplate System
- 2 Year Warranty
Single Gang Snap In Face Plate (2 Module)
£3.77
- Supplied with fixing screws and labels, may be surface or flush mounted
- Accommodates 2 modules from AV Face Plate System
- A blanking plate can be used if only a single module is installed
- Requires a back box with a minimum depth of 44mm or greater
- Warranty: 2 years
Use in conjunction with a Single Surface Pattress Box.
300m Fibre Optic HDMI 4K30 Extender
£506.74
- Extend HDMI signals at distances of up to 300m using a single LC multimode fibre cable
- Supports resolutions up to 3840x2160p@60Hz 4:2:0 8bit
- 10.2 Gbps Total Bandwidth over Single 2-core Fibre Optic Cable Link
- Supports lossless audio formats including Dolby TrueHD and DTS-HD
- 2 Year Warranty
Single Snap-in Block, 4 Pack
£5.92
- Single Snap-in block
- Supplied in a pack of 4
- Suitable for use with our range of Snap-in Blocks and face plates
- For use with all standard sized keystones (15mm x 20mm)
- 2 Year Warranty
A Dual Snap-in Block is also available.
DVI EDID Emulator
£22.02
- Continuously emulates DVI EDID information
- Supports resolutions up to 2560x1600@60Hz
- For use with 32120 for cloning
- Powered via DVI Source Interface
- 2 Year Warranty
Dual Snap-in Block, 4 Pack
£5.92
- Dual Snap-in block
- Supplied in a pack of 4
- Suitable for use with our range of Snap-in Blocks and face plates
- For use with all standard sized keystones (15mm x 20mm)
- 2 Year Warranty
A Single Snap-in Block is also available.
300m Fibre Optic HDMI 4K60 Extender
£759.58
- Extends HDMI signals up to 300m using a single LC multi-mode cable
- Supports resolutions up to 4K Ultra HD @ 60Hz
- Experience an expanded range of contrasts and colours with HDR (High Dynamic Range)
- Supports lossless HDMI audio formats including Dolby Atmos and DTS-X
- 2 Year Warranty